diy wood

Browse » home» Tool Kit to Go

---

Tool Kit to Go

I've been going through the digital pictures on our computer, trying to figure out just what all is in there, and I came across some pictures of a kit of tools. I had taken the shots so I would remember what was included in the kit, and then promptly forgot about the pictures and the kit. I guess this would qualify as a "Desert Island tool kit", only in this case it was "Alaskan Wilderness tool kit."

Two summers ago, my brothers and I were planning a raft trip down the Nelchina River, onto Tazlina Lake, and down the Tazlina River.

Here�s a Google Map of the area:

View Larger Map

Part of our plan involved building some kind of mast from driftwood or downed timber, and rigging a sail (blue tarp) to take advantage of the prevailing wind on the lake. To this end, I put together a tool kit that would be as versatile and as small as possible.

Unfortunately, events conspired to keep me from going on the trip, but the tool kit went without me.

Here�s the kit I put together for the trip:

Hatchet
Drawknife
Chisel
Utility Knife
File
Sharpening Stone
Brace
Auger Bits (5)
�� hex driver for brace
Flat and Phillips hex bits (3)
Various Screws
Vise Grips
Adjustable Wrench
Sven Saw (not pictured)
Rope (not pictured)
Ubiquitous Blue Tarp (not pictured)
Dry Bag (not pictured)

It all conveniently fit in the shop apron that I no longer wore...

...which then folded up into a perfect package to fit snugly into a small dry bag for the trip.

It was a fun challenge to put the kit together - trying to keep it as simple as possible tool wise, but as complex as possible capability wise. And of course, it would have been better if I had actually gotten to use it...maybe next time.

A few random notes:

The blue thing on the drawknife is part of a plastic document binder - it snaps on to the blade and protects fingers that wander through the gap in the folded handles.

The film canisters (hey - remember film?) contain an assortment of screws and nails.

The Vise Grips and wrench were specifically taken for working on the raft frame.

The mast was designed to be lashed together.